Turquoise Ginger Jeans: Lounge Camouflage

It wasn't until I came to resize these images, that I realised just how similar my new jeans are to the colour of our lounge wall! However, this is the only decent spot in our flat for taking photos, plus if you'd seen how many toys I had to clear out of the way to get these pics, you'd understand why I'm not going to re-shoot them. 

Pattern:

Maybes you remember my first crack at the Closet Case Patterns Ginger Skinny Jeans pattern? Well those have been worn sooooo often, that I knew another pair would be in the pipeline before long. What I have found with my first pair though, is that the low-rise option (view A) really is low. I wouldn't feel decent wearing them without a vest (AKA camisole/singlet) tucked in to them, especially if I planned to sit or bend down. That's fine for the three quarters of the year during which I wear vests, however I wanted my second pair to have year-round wearability. My feeling was that the high-rise option (view B) of the original Ginger jeans pattern would have been too high for me, and I considered buying the mid-rise version until my friend Paula told me that Closet Case had generously published a blog post with a tutorial for drafting your own mid-rise version. Let's do this!

(image source: Closet Case Patterns)

To draft a mid-rise pair, it is suggested that you start with the original high-rise option (view B), as the proportions of the pockets and such are more suitable. I chose to make the rise exactly in between the views A and B. I took some additional body measurements to find out what I measured around the waistband of my view A pair, and what I measured around where I intended my new waistband line would be. That different of measurements was very useful when following the steps in the post. I should point out that Closet Case's tutorial doesn't include shortening the fly piece, which does need to be done. 

I'm not the first to say that each time you make the Ginger jeans, or any pattern that uses a fabric with some stretch content, it's important to have a mid-way fitting sesh. Even if the fit on your last pair was perfect, each stretch denim will have slightly different properties so can't assume your next pair will also be spot on. I was relieved that, after all that pattern tweaking and the different denim, the fit of my second pair before I attached the waistband was great. After I tacked the waistband on, I tried them on again, but found them too tight at the waist, so I unpicked and reapplied the waistband,  easing in some extra length. 

One fitting note that I didn't discover until they were all finished and being worn, is that I think they are too wide around the ankle. You can see it pretty clearly in these pics. At the moment the weather is pretty warm, so I'm wearing them with the hems rolled up a bit. However, when it cools off and I want to cover my ankles up again, I'll unpick the hem and take some of that width out from the side seam. 

For the topstitching on the back pocket, I used one of the downloadable designs that you can access from the Closet Case Patterns site when you sign up for their newsletter. I transferred the design to the pocket pieces using white carbon paper and a tracing wheel, and I'm soooo happy with how they came out. I would definitely recommend the designs that use straight rather than curved lines for getting a clean result.  

Fabric and Interfacing: 

If you recognised that this turquoise denim was one of the nine pieces of stash fabric I pledged to use up in my #2019makenine plans, then you get a million points. This project is my fourth completed project for that challenge, although a lot more sewing has been happening that aren't part of those make nine plans. This fabric is some turquoise-y stretch denim that I bought from Fabric Godmother a few years ago. Since buying it, I'd fallen out of love with it, but now that it's made up into a garment that feels good to wear, I'm a fan again. The elastane/Lycra content must be pretty high, because it has a kind of synthetic-y sheen, but because of that content, it feels like I'm basically wearing leggings rather than jeans. 

I had a long debate with myself about what to use for the facing and interfacing for the waistband. Feeling comfortable, particularly round my waist is of MASSIVE importance to me, and can totally dictate whether or not a garment I've made ever gets worn. I can't remember if I used interfacing on the waistband of my first pair of Gingers, however I used a non-stretch woven cotton for the waistband facing, so that waistband basically has no give. However, due to the fact that that pair sits so low, I still find them comfortable to wear, as long as I have a belt to stop them heading south.   

But because this second pair were going to be sitting higher up, closer to my natural waistline, I wanted to ensure more give so that I wouldn't feel constricted. I decided to use the same stretch denim to face the waistband, plus I applied fusible interfacing for knits to the waistband piece itself. The result is a pleasingly stretchy waistband that definitely does not feel constricting. Howevs.... they do start to migrate down a bit whilst they are being worn. I'm wearing a belt with them to counteract this, which slightly nullifies the point of a stretchy waistband. Any thoughts?!

Oh but wait! Did you see my pocket bags?! I got to use up an awesome remnant of quilting cotton that I'd bought from Ditto in Brighton yonks ago. It's got a cute 1950s kitchen print which is kind of at odds with a pair of turquoise skinny jeans, but I think that makes me like the combo even more. 

Thoughts:

You've probably already gathered that I'm really into this me-made! I promise to dig deep and sort out the excess width around the ankles so that I'll like them even more. I find jeans making sooooo satisfying. This year's Me-Made-May challenge taught me that a pair of black skinny jeans would be a useful addition to my wardrobe. So when Autumn hits, I'll keep my eyes peeled for some great black stretch denim and use this pattern exactly as it is for those. 

Urban Farming (AKA Mila Dunagrees)

Cards on the table: I'm not feeling great about my body at the moment. Winter eating patterns (AKA eating EVERYTHING), having had two babies, as well as entering my late thirties all seem to have taken their toll recently and I'm not feeling at all comfortable. I'm hoping that improved eating habits and adapting my expectations will meet in the middle and I'll feel happier in the near future. But in the meantime, I thought it best to make myself a stretchy, tight fitting garment to wear and get photographed in, then share those pictures on the internet. Behold: my new Urban Farmer look. 

Pattern:

Like many I don't doubt, I was instantly drawn to the Mila dungarees pattern. I love wearing jeggings (despite all the hassle they've given me) and I hoped these would be a fun and interesting alternative. Tilly was kind enough to send me a copy of the pattern, so I made a special pilgrimage to Fabric Godmother (more on the fabric in a bit) and set to work. 

I cut the TATB-size 4, and made a couple of small changes. Firstly, I re-drafted the curved edge of the bib piece so that it finished a bit closer to the side seam. And secondly, I spent quite a bit of time making tiny tweaks to the fit of the legs to get them looking balanced all the way down. I could easily have lopped off a few centimetres from the leg length, but I've made too many pairs of jeans and trousers that have ended up annoyingly short after a few washes, so I'm keeping these a bit long as I expect they may do the same. 

The fit-tweaking aside, I found the process of making these sooooo much fun. Working with a well behaved denim and doing all that tidy topstitching was heaven. If I were to make them again, I might even add some extra topstitching to the waistbands or crotch seam, as the topstitching is currently largely concentrated on the bib area. 

Fabric:

Despite some stunning patterned versions popping up on IG, I knew I needed to keep my pair solid. And it had to be denim if they were to become the alternative jeans/jeggings that I hoped they would. I can't find this denim on the Fabric Godmother website right now, so you'll have to go with my title: fabulous-quality mid-blue stretch denim. I always associate this colour denim with the 1970's, and I adore how it looks contrasted with orangey-gold topstitching thread. I must admit, there is a part of me that is regretting not making these dungarees in black. But having made my Cleo pinafore in black, I felt my wardrobe would welcome a little variety. 

Let's talk hard wear. I was sent the buckle set that Tilly stocks with the pattern, and I ended up using the clips combined with these antique copper jeans buttons. Fabric Godmother also stocks the smaller 14mm antique copper jeans buttons, which I got for the side fastenings. I think these buttons suit the denim's colour and vintage-y vibe, whereas I feel it would be silver all the way if I made a black pair. 

Thoughts:

As I'm sure you can tell, I haven't landed on a final opinion on these yet. Perhaps I should have made them in black and saved this vintage-y denim for some epic Lander pants? It is, of course, impossible to say. 

This post is feeling a bit confessional somehow, but I must also admit that the fit around the bum area is not great. I did get Pat to take a pic, but I really didn't feel like sharing that one today. However, I may share that pic with the tutor of The Perfect Jeans craftsy class and get her opinion on what could be improved (as I wrote about in this post). It may be that a bit of scooping could get them looking and fitting better, but I'm not ready to jump down that rabbit hole right now.  

What I do know, is that these feel fairly comfortable. More comfortable than I was expecting them to feel, if truth be told. Stating the obvious, they are currently a bit too tight around my middle. But me  laying off the bread and choc a bit, and putting them through a few more wears and washes, and they should be sufficiently loosened up. Plus, if I can't get them looking better (either through sorting myself out a bit or working on the fit some more), I could always relegate them to use on my future allotment...

Jeggings Attempts #3 and #4

It's been a journey, guys. This post represents the large amount of time and mental energy that has been taken up by this quest for successful jeggings. Remember when I was talking about ways we can pursue making great, long-lasting garments, thus making sewing a more sustainable activity? Well this whole journey has definitely ticked a whole load of those boxes, although I certainly couldn't muster up the energy to attempt to perfect every project/pattern to this degree!

But let's back up. If you're interested in the details of where I'd got to with The Saga of the Jeggings, then please head to this post to read about my first and second attempts. The black pair (#2), despite their issues, have been worn HEAPS. Like, almost daily. The quality of the denim I used is amazing. The colour has faded quite a lot, as you'd expect with repeated wear and laundering, but they keep their shape so well, and by the end of the day they haven't sagged at all. But, if you already read that post then you know I was pretty stumped about where to go next with improving the fit.

A while ago I'd bought, but not fully watched, the Craftsy class called The Perfect Jeans with Jennifer Stern-Hasemann (my new favourite person). I returned to that class after a tipoff from TATB employee and general amazing lady Vanessa (who had read my Jeggings Attempts #3 and #4 post so knew of my troubles) that it may hold the key to my fit issues. I watched the relevant sections of the Craftsy class but still felt unsure of how to proceed. I then spent a number of evenings reading pretty much all the fit issue questions posted by viewers in the class notes and Jennifer's responses to them, partly because I was finding it fascinating, but mainly in the hope that someone would be having the same issues as me. Then it finally dawned on me: I could just bloody ask Jennifer myself! I was a little concerned that she'd tell me that her class was about fitting 'proper' jeans, not jeggings, but as a paying customer I was hoping that she'd throw me a bone and offer some advice anyway. She did.

Jennifer suggested I scoop out the crotch a bit (see the red line in the picture above that she helpfully drew on). The aim of this was to create more space for my bum so they didn't ride down so much at the back when I sat down, whilst also to picking up some of the excess length I had on my black (#2) pair. I also lowered the waistline by 2cm for comfort, shortened the leg length, tapered the leg at the ankle a bit and repositioned the pockets. The navy pair you see below are the result of making these changes.

Thoughts:

Better, no? I used some cheap stretch twill from Fabric Land in Brighton that has four-way stretch. I'm not sure I've knowingly encountered a woven with four-way stretch before, but it's made for very comfortable jeggings. They are basically the only pair of trousers/jeans/jeggings that I don't change out of as soon as I get home (I'm wearing them now, in fact). As for construction, I didn't bother with any real or faux felled leg seams this time, just closed ones on all seams. I also selected a very narrow lightning stretch stitch on my machine as a few stitches have popped around the waist seam on my black (#2) pair. I spent quite a bit of time creating some gently shaping around the calf so that they fit really nicely round there which I'm super pleased with. 

However, there's the following:

• some excess fabric around the back thigh
• they ride down at the back a fair bit when I sit down 
• the pockets are still too low and too close to the side seam  
• and now I've got some kind of knock-knee issue going on

Back to Jennifer...

She suggested I corrected the knock-knee by slashing both the front and back pattern pieces at the knee and shifting the bottom half towards the inseam about 1/2", then reshaping the leg seams (the adjustment in red labelled 1 in the picture above). (We decided against making the adjustment labelled 2 in the end.) I also extended the back crotch point, but only about 1/4", to help a bit more with the riding down at the back when I sit. Oh, and added some length back to the hem. The results (#4):

Thoughts:

Pretty good, I hope you'll agree. Well, that's what I thought when I first put them on. Then I wore them for a morning and they kept riding down at the back every time I bent down (which with a tiny toddling little guy around is OFTEN) and it was driving me crazy. I was so desperate to take them off as soon as I got home, that I must confess, I changed out of them before I even unclipped Frankie from his pushchair! 'AGH', I thought, 'They're a bust'!. I put it down to this cheap stretch twill (once again from Fabric Land, I'm not proud) that has only two-way stretch. 'Maybe I can only make this pattern in four-way stretch', I thought and prepared myself to chuck them in my textile recycling bag. Then I checked and found that the black denim that my #2 pair is made from only has two-way stretch (albeit much better quality), so I had a re-think. I went and bought some wider, sturdier and better quality elastic, then unpicked and remade the waistband with the new elastic inserted. It made the world of difference and these now stay in place as I move about, bend down etc. Phew! I think the lesson I need to take away from this pair, that I already mentioned in my sustainability post but clearly hadn't taken fully on board, it that quality fabric and notions can make a massive difference. 

Next step:

I don't think there's anything further I can do to this pattern. I've accepted the slight excess of fabric around the back thigh as necessary for being able to walk and sit down properly. This pattern is as close to perfection as I think I can get. Jennifer agrees. This week I went back to my black (#2) pair and re-hemmed them to make them a bit shorter, then unpicked and restitched the waistband having lowered the waistline by 2cm. Now I have three wearable pairs of jeggings: black (faded to grey), navy and red. I'm particularly thrilled to have red ones, despite it probably being the worst quality fabric of the three, but I've had my eye on owning some red trousers or jeans for years. That's probably a sufficient quantity of pairs of jeggings to own. It's great to know that I've got the pattern ready as and when any of these become unwearable. However, I've got a gorgeous piece of turquoise/blue stretch denim in my stash (this I think), and I fancy pushing myself a bit further. I'm talking 'proper' jeans. Like, with a yoke, belt loops, fly front, the whole nine yards. Jennifer thinks I can adapt this pattern a bit to become a proper jeans pattern, so watch this space for that.  

Jeggings Attempts #1 and #2

By making my versions of the Luna pants pattern, I successfully created some very wearable trousers whilst neatly side-stepping the trouser-fitting headaches I was having in the spring. So I thought I'd try to pull off the same trick (making wearable trousers whilst side-stepping my trouser fitting issues) by recreating my favourite secondhand RTW jeggings. Here's how that went....


Version #1

Pattern and construction:

Because my old jeggings (the washed-out black ones pictured below) were very much on their last legs, I decided to cut them up so I could lay the shapes out flat, rather than trying to take a pattern from them still as a 3D object. I omitted the back yoke, which didn't seem to be adding anything in terms of shaping, and made the back in one piece instead.

I kept the cut up pieces of dissected jegging so I could take some hints for construction. I decided, as per the originals, to make faux-flat felled seams on the outer legs by making closed seams then pressing and top-stitching down the seam allowances towards the back. The inside legs are regular closed seams. I made the pattern full length, as per the originals, but my #1 copy were cropped due to fabric restrictions.

Fabric:

I've had my eyes peeled for decent jeggings-appropriate stretch denim for a while but it's been pretty illusive. Stretch-denim in general seems to be fairly common, but I need the really stretchy, four-way stretch stuff that's going to behave more like leggings fabric and can deal with an elasticated waist design, rather than the type of denim that you'd buy for making regular jeans that happens to have a small amount of give in it. There's probably a way to describe what I'm talking about using percentages of stretch, but I don't know what that's about yet. Anyway, when I found a 95cm remnant of suitable fabric at a Ditto sale, I snapped it up, even though it wouldn't be quite long enough for the pattern I had copied.

Thoughts:

Generally speaking, for a first attempt they weren't too bad, and I've worn them masses in the two months since I finished them. I even like the necessity-is-the-mother-of-invention cropped length, which has made them really useful for the summer. And I thought I could get winter use from them if worn with long socks and knee-high boots.

So, the bad stuff. The first thing that grabbed my attention was that the overlocking and my faux-flat felling of the outer leg seam felt very noticeable. I probably should have overlocked away at least 0.5cm of the seam allowance before the top-stitching. However, I don't know if it's the wearing and washing softening up the outer seams, or just sensory adaptation, but I realised the other day definitely don't notice it as much these days.

Also, I'd say that overall they are a little big, probably because the fabric of the originals didn't have quite as much stretch as the blue Ditto fabric so the pattern is a little bit too large for this particular fabric. And they are also way too high, particularly at the back. I like that I can bend over in a playground with absolutely no chance of scarring anyone for life, but I have to yank them up from time to time as I don't think it's helping the baggy-bumness.

Speaking of which, check out the horrendous-ness of all those under-bum wrinkles in the image above. I was sooo tempted not to share the back view of these, but then I really need your hive-mind opinions. After all the wears and washes these have had so far, I think the fabric has got a bit saggy, especially by the end of the day which is when I got Pat to take these photos. However, I fear those wrinkles may not be all down to saggy fabric and that some pattern adjustment may be required. Annoyingly, I didn't give the under-bum much notice when I first made these so I'm not sure what the fit in that area was like when the fabric was still very fresh and new. I'm really hoping that it IS the fabric rather than an issue with the pattern, because considering all the hassles I had/am having with the fit of the slim-legged, side-zipped, Ultimate trousers, any visible pooling of fabric/wrinkles under the bum is making me feel like this:


via GIPHY


Version #2

Pattern and construction:

After the relative success of #1, which I view as a wearable toile, I was excited to crack on with another pair soon after. So I lowered the height of the waist by 2cm at the front and 3cm at the back (blending between the two at the sides). I decided to leave the overall size/width the same in case my next piece of fabric had a better recovery/wearability than the blue Ditto stuff. I was also excited to try out the full-length of my pattern, which I'd kept accurate to the originals in length and width round the ankles.

As for construction, I learnt my lesson and made proper flat felled seams on the outer legs to hopefully reduce/omit the discomfort in that area. I also chose a quicker and less faffy method of attaching the waistband/elastic channel than I did on #1 that I won't bore you with. I was also feeling pretty confident going into this version, so I decided to add some patch pockets for extra interest, seeing as I wasn't using contrast top-stitching this time round.

Fabric:

If it's possible to be in love with a piece of fabric, then that's what's happening here. This version is made from some super stretch denim from Fabric Godmother. I'd seen it at their studio space during our recent Portslade bloggers' meet-up, but I didn't buy any because I was on a budget (which obviously got blown anyway). But I kept thinking about it so emailed Josie to check she still had some in stock in advance of their July Open day, hoping she'd put some aside for me if it was running low. Because she is the more generous and thoughtful lady, she sent me a length for free instead! I'm not sure if she getting any more of this exact denim in stock (might be worth emailing her), but there are a lot of other fabulous similarly-stretchy denim on their site, including this blue that I also have some of.

Thoughts:

Ok, first the good points. These feel really comfy and generally I think they look pretty good, therefore I've worn them heaps since I finished them. These are a more recent make, they haven't had as much wear or washing as #1, however I'm pretty sure that they will fair better over time. These pictures were taken when they were fresh out the wash, but you'll have to trust me that the black denim doesn't get so saggy by the end of the day. The real flat felled seams have worked a charm and I don't notice the the outer leg seams at all.

Now for the faults that I think I can improve on without inducing a headache. They still sit too high on my waist. It may not look like it, either in the flesh or in photos, but this is a personal comfort thing. When I wear them now, I tend to roll the waistband down to get it sitting where it feels most comfortable to me. When I can muster the patience, I will go back and unpick and re-do it for a lower waistband permanently.

Another simple flaw is that my patch pockets are sitting too low and too far to the outer leg seams. The height doesn't really notice too much as I always wear tops that cover at least the waist area of these jeggings (I've just got my top tucked in for these photos so you can see what's going on), but for future versions I need to make a note to position them a touch higher.

I also think the wrinkles around the knee are because the jeggings are too long in the leg, so hopefully I can make those disappear easily enough.

Right, time for the tricky stuff. It may not have escaped your attention that, although not as pronounced at the rear view of version #1 there's still some wrinkles under the bum on this pair as well. I think this could be for one of three reasons (or a combination of the three):

1) After an aha-moment whilst listening to the Melissa Fehr episode of the Crafty Planner podcast, I wondered if those wrinkles are a pooling of fabric caused by the fabric being pushed down because the fit is too tight across my bum (although they don't feel it). If that's the case then I do not have a Scooby-do (Cockney for clue) how to change my pattern to correct that.

2) Perhaps less visible in these photos, compared to the originals, like version #1, version #2 still feels too room-y around the pelvis and thigh area. The waist fits fine because I adjusted the elastic to be the correct length so they pull in sufficiently at the waist, but if I were to take in the side seams a smidge from the waist to the knee my theory is that there's less likely to be any wrinkles if the fabric is stretched more across my body. I guess this route would lead to a tighter, more sprayed-on effect like you see many of the 'youth' rocking these days. Annoyingly, I can't simply nip these in to test that theory because of the flat felled seams.

3) The issue could be the same one that my trouser-fitting saga is throwing up. I might need to do some 'scooping out' of the back rise, or lowering the back crotch curve, or taking in the in-seam (although the latter may have cause me problems when I did that to my black pair of Ultimate trousers) because of some kind of low-bum issue or something.

One word:


via GIPHY

What is also clear, is that each different denim fabric would need its own unique sewing pattern to get the best version of jeggings possible. But without making a toile and the subsequent pair from the exact same fabric, I guess I'm going to have to forgo the real flat felled seams in favour of making a pair that can be adjusted at the seams to get a close-to-perfect fit for future versions.

Going forwards:

Having recently read through a lot of Tasha from By Gum By Golly's trouser-fitting trials and being inspired by her tenacity, I'm more determined than I felt for a long time to really get to the, umm, bottom of my trouser fitting endeavours. So now I've got two challenges: to perfect my jeggings pattern, and to perfect my Ultimate trousers pattern. Both these patterns require fabric with some stretch content, unlike Tasha who is aiming to get a great fit for wovens both with and without stretch. I don't feel comfortable in slim-legged trousers or jeans of any type made from fabric without the lycra/elastane/spandex/blah blah. So now when I find some nice woven-with-stretch fabric, I'll pick which of these patterns it'll probably be best suited to and push onwards...

As it stands, I feel the jeggings are closer, but I'm determined to nail both. Then Frankie will pack in breastfeeding and winter will come and I'll put loads of weight on and have to make a whole heap of new pattern changes! Oh, and one day I hope to find the 'proper jeans' sewing pattern that appeals and use that as a base to work on that type of garment too. Hopefully, by then, I'll have learnt so much about trouser fitting and my personal shape that I'll have a heap of knowledge I can transfer to that.

If you have any insights to my fitting issues, please do share your thoughts via a comment. And, how about you? Do you ever wonder if you should just go to a shop and buy some trousers/jeans/jeggings instead?! Have you gone down the trouser/jeans/jeggings fitting rabbit hole and come out victorious? Please let me know!